Home > Care > Phones Support > Support Information > GF200   
 
 
GF200
Support & Downloads
Tips for use
 
 
 
 
Find Model Name
 
 
 
 
Snap Shot

Close the folder to initiate the camera function. Press the side [camera] key longer to activate the camera shooting mode. Press the [camera] key shortly again to take a photo. And then, the shot image will be displayed in the screen. At this time, press short the [camera] key to save the picture with auto naming. In the View mode, press the [down] side key to return to the camera capture mode.
Press the [camera] key longer to move to the standby mode.

Flash on

You can use the handset as an emergency light. Press the Side volume [up] side key longer in the standby mode. The camera flash is lighted automatically for 10 seconds.
Press the [down] side key or [camera] key to flash off during this time.

Rejecting a Call
Press the [call end] key or the [Reject] Soft key when the folder is open. If the [Reject] Soft key is pressed, the caller will receive the busy line tone. When the folder is closed, press the [up/down] side key longer during ringing for incoming call.
Switching the Microphone Off (Mute)

You can temporarily switch your phone's microphone off so that the other person cannot hear you. For example, you may wish to say something to another person in the room but do not want the calling person to hear you.
Press the [Mute] Soft key shortly, Or, select Option followed by 'Mute' to activate the Mute function.
To switch the microphone back on: Press the [Sound] Soft key shortly. Or, press the [Option] Soft key and then press the [Select] Soft key or [OK] key, when [Sound] highlights.

Taking a Video
1. Select '4.Fun &Tools -> 1.Camera -> 2.Take a Video' from the menu by this order to enter into the Video Shooting mode.
2. Upon entering into the Video Shooting mode, the image taken by the internal camera lens will be displayed. * Size of the video image is fixed to LCD (128X124).
3. Adjust the image by aiming the camera at the subject. Use the [Side] key to zoom In/Out and use the [* / message] key to control brightness.
4. Press [camera] key to record the preview image.
5. Press the [Cancel] key to cancel recording and return to the Preview screen. Press the [stop] key to stop recording.
6. If you press the [extention] key, the Save Option screen will pop up and you can select an album to save the video. Then, edit a video file name. When 'Auto Save' is selected from the camera setting, the set name and album will be automatically saved without any Save Option screen.
Press the [Cancel] Soft key to return to the Preview screen without saving video images. Press the [Play] Soft key to play the recorded video images.
Ring Tone

Select 'Menu>5.Profiles >1. Ring Tone' and press the [ ] key, or press the [melody] key and [OK] key in the standby mode and select '1.Ring Tone' . * You can choose the preferred ring type and melody to ring and volume.
- Ring type: Ringing, Vibration, Vib then ring, Vib and Ring, Ascending, None(quiet)
- Ring Volume: Controls the volume by 7 levels
- Sound: Sound is composed of several groups such as Melody Sound, Bell Sound, Voice Sound, and 3D Sound and each Group has multi tones. User Sound presents the melody of '4.Fun & Tools -> 2.Media Gallery -> 4.Sound Gallery' in consequence.

Navigating the WAP Browser

To scroll through and select browser items, press the[melody / phone book] key until the item you want highlights, and then press the [Select] Soft key.
To return to the previous page, press the [clear] key. To return to the startup homepage, select [Option]> Home.


 

home